17
3. WEB MANAGEMENT CONFIGURATION
To access the management interface, WoMaster router has two ways access mode through a network; they are web
management and telnet management. Web interface management is the most common way and the easiest way to
manage a network, through web interface management, a router interface offering status information and a subset
of device commands through a standard web browser. If the network is down, another alternative to access the
management interface can be used. The alternative way is by using telnet management which is offer configuration
way through CLI Interface. This manual describes the procedures for Web Interface and how to configure and
monitor the managed router only.
PREPARATION FOR WEB INTERFACE MANAGEMENT
WoMaster provides Web interface management that allows user through standard web-browser such as Microsoft
Internet Explorer, or Mozilla, or Google Chrome, to access and configure the router management on the network.
1.
Plug the DC power to the router and connect router to computer.
2.
Make sure that the router default IP address is
192.168.10.1
.
3.
Check that PC has an IP address on the same subnet as the router. For example, the PC and the router
are on the same subnet if they both have addresses that start 192.168.10.x (Ex:
192.168.10.2)
. The subnet
mask is 255.255.255.0.
4.
Open command prompt and ping
192.168.10.1
to verify that the router is reachable.
5.
Launch the web browser (Internet Explorer or Mozilla Firefox or Google Chrome) on the PC.
6.
(or the IP address of the router). And then press
Enter
and the login page will
appear.
7.
Type user name and the password. Default user name:
admin
and password:
admin
. Then click
Login
.
In this Web management for Featured Configuration, user will see all of WoMaster Cellular Router’s various
configuration menus at the left side from the interface. Through this web management interface, user can configure,
monitoring, and set the administration functions. The whole information used web management interface to
