78
Dest Port Filter
Entries in this table are used to restrict certain ports of data packets from user’s local network to Internet through
the router. Use of such filters can be helpful in securing or restricting local network. And the device cannot send any
packets to the destination port that showed on the list.
Select
Enable Destination Port Filtering
, type the
Port Range
of below
Protocol
type, the protocol type can be
UDP,
TCP or Both
. Type the
Comment
to write note for the entry and then press
Submit
to apply the settings.
After applied, then user can see the new entry shown in the below table.
The description of the columns is as below:
TERMS
DESCRIPTION
Dest Port Range
Display the Destination Port Range (Range is from 1 to 65535)
Protocol
Display the protocol that has been chosen by the user.
Comment
Put any notes for the entry.
Select
Select the table, so user can press
Delete Selected
to delete,
Edit
Click edit to modify the parameters
Click
Refresh
to refresh the table
