Wolfgang Warmbier METRISO 3000, Руководство по эксплуатации

Страница: 19 / 32

Wolfgang Warmbier GmbH & Co. KG 19
8 Measuring Resistance – Ohm Function
Resistances of greater than 1

and less than 10 k

are mea-
sured in this switch position.
Select Measuring Function
➭
Select the

measuring function with the rotary switch.
Connection
➭
Connect the device under test to the + and COM jacks.
Attention! !
Resistance can only be measured at voltage-free ob-
jects. If mains voltage or interference voltage is applied to
the measurement inputs, measurement cannot be
started.
Start Measurement
➭
Start an individual measurement by briefly pressing the START
key, or initiate continuous measurement by briefly pressing
the
CONTIN key.
9 Temperature and Humidity Measurement with
the Z550B T/F Adapter
Applications
Temperatures from -10.0

C to +70.0

C and humidity within a
range of 10.0

and 90.0

can be measured with the combina-
tion temperature-humidity adapter.
Observe the operating instructions for the adapter.
Attachment to the Test Instrument
➭
Lift the protective rubber flap.
➭
Plug the temperature-humidity adapter into the RS 232 port at
the test instrument.
Select Measuring Function
➭
Select the T/F measuring function with the rotary switch.
The adapter is switched on via the RS 232 port.
If you have not yet
plugged the tempera-
ture-humidity adapter
into the test instrument’s
RS 232 port, or if the
adapter is not making
good contact with the
port, the error message
shown at the right
appears.
Make sure that the
adapter is correctly
seated.
Start Measurement
Note
As long as the T/F sensor is connected to the RS 232
interface, automatic shutdown of the ESD test instrument
is disabled.

+
COM
R
x
START
CONTIN
T/F
START