Wolfgang Warmbier METRISO 3000, Руководство по эксплуатации

Страница: 12 / 32

12 Wolfgang Warmbier GmbH & Co. KG
4.5 Setting Measuring Parameters per ESD Standards
4.6 Setting Measuring Parameters using Limit Value Specifications as an Example (example: setting the “lower limit value”)
1 Access the submenu for setting the desired parameter.
2 Select the parameter (in this case the lower limit value) with the

or

scroll key.
3 Switch to the settings menu for the selected parameter with the

key.
4 Select a setting value using the

or

scroll key.
5 Acknowledge the setting value with the

key. This value is transferred to
the setting menu.
6 The setting value is not permanently accepted for the respective measure-
ment until
✓
is pressed, after which the display is returned to the main
menu. You can return to the main menu by pressing ESC instead of
✓
,
without accepting the newly selected value.
1
3
2
3
4
4
5
4
6
5
1 Access the menu „ESD tests“.
2 Select the parameter (in this case Verification)
with the

or

scroll key.
3 Switch to the settings menu for the selected
parameter with the

key.
4 Select a setting value using the

or

scroll key.
5 Acknowledge the setting value with the

key.
This selection is transferred to the setting menu.
6 The selection is not permanently accepted for
the respective measurement until
✓
is pressed,
after which the display is returned to the main
menu. You can return to the main menu by
pressing ESC instead of
✓
, without accepting
the newly selected value.
1
6
3
4
4
5
2
3
4
5