Page 8
4
Remove the burner assembly from the unit.
Burner Cap
Burner Assembly
Igniter
Electrode Wire
Remove the Igniter
1
Use a Phillips screwdriver to remove the screw from the
underside of the burner assembly.
2
Remove the igniter from the burner assembly.
IGNITER INSTALLATION
Install the Igniter
1
Install the igniter into the burner assembly.
2
Use a Phillips screwdriver to install the screw into the
underside of the burner assembly.
Install the Burner Assembly
1
Attach the electrode wire to the igniter.
2
Place the burner assembly into the burner pan.
3
Use a T-15 Torx bit to install the screws holding the burner
assembly to the orifice holder, torqued to 24 in lb.
Install the Burner Cap
Place the burner cap onto the burner assembly.
Install the Burner Grate
Place the burner grate onto the cooktop.
ORIFICE REMOVAL
The main and simmer orifices are threaded into the orifice
holder and may be removed without removing the orifice holder.
To access the orifice, first remove the burner grate, burner cap,
and burner assembly.
WARNING
Turn off the power to the product before starting this
procedure.
Remove the Burner Grate
Lift the burner grate from the unit.
CG Professional Gas Cooktop Service Manual
REMOVE THE BURNER ASSEMBLY (continued)
service.subzero.com
828386 REV. A 06/2018
7
