Page 6
Remove the Bezel
1
Twist the bezel 90° counterclockwise.
2
Pull the bezel from the pan.
3
Disconnect the bezel from the light wire harness.
4
Remove the bezel from the unit.
BEZEL INSTALLATION
Install the Bezel
1
Connect the bezel to the light wire harness.
2
Insert the bezel into the unit.
3
Twist the bezel 90° clockwise.
Install the Knob
Push the knob onto the valve shaft.
BURNER ASSEMBLY REMOVAL
To remove a burner assembly, first remove the burner grate and
burner cap.
CAUTION
The unit might be supported by the burner pan. The
unit must be uninstalled if more than one burner
assembly or the burner pan is being removed.
WARNING
Turn off the power to the product before starting this
procedure.
Remove the Burner Grate
Lift the burner grate from the unit.
Remove the Burner Cap
Remove the burner cap from the burner assembly.
Remove the Burner Assembly
1
Use a T-15 Torx bit to remove the screws holding the burner
assembly to the orifice holder.
2
Lift the burner assembly from the burner pan.
3
Remove the electrode wire from the igniter.
CG Professional Gas Cooktop Service Manual
service.subzero.com
828386 REV. A 06/2018
5
