Page 20
Remove All Knobs
Pull all of the knobs away from the unit.
Remove All Bezels
To remove each bezel:
1
Twist the bezel 90° counterclockwise.
2
Pull the bezel from the pan.
3
Disconnect the bezel from the light wire harness.
4
Remove the bezel from the unit.
Remove All Burner Assemblies
To remove each burner assembly:
1
Use a T-15 Torx bit to remove the screws holding the burner
assembly to the orifice holder.
2
Lift the burner assembly from the burner pan.
3
Remove the electrode wire from the igniter.
4
Remove the burner assembly from the unit.
Burner Cap
Burner Assembly
Igniter
Electrode Wire
Remove the Burner Pan
Lift the burner pan from the burner box.
Remove the Receptacle
1
Use a Phillips screwdriver to remove the mounting screws
from the receptacle.
2
Remove the receptacle from the unit.
CG Professional Gas Cooktop Service Manual
service.subzero.com
828386 REV. A 06/2018
19
