Page 13
4
Remove the bezel from the unit.
Remove All Burner Assemblies
To remove each burner assembly:
1
Use a T-15 Torx bit to remove the screws holding the burner
assembly to the orifice holder.
2
Lift the burner assembly from the burner pan.
3
Remove the electrode wire from the igniter.
4
Remove the burner assembly from the unit.
Burner Cap
Burner Assembly
Igniter
Electrode Wire
Remove the Burner Pan
Lift the burner pan from the burner box.
Remove the Receptacle
1
Use a Phillips screwdriver to remove the mounting screws
from the receptacle.
2
Remove the receptacle from the unit.
RECEPTACLE INSTALLATION
Install the Receptacle
1
Install the receptacle onto the burner valve.
2
Use a Phillips screwdriver to install the mounting screws
into the receptacle.
Install the Burner Pan
Place the burner pan on the burner box.
CG Professional Gas Cooktop Service Manual
REMOVE ALL BEZELS (continued)
service.subzero.com
828386 REV. A 06/2018
12