Page 9
Remove the Burner Cap
Remove the burner cap from the burner assembly.
Remove the Burner Assembly
1
Use a T-15 Torx bit to remove the screws holding the burner
assembly to the orifice holder.
2
Lift the burner assembly from the burner pan.
3
Remove the electrode wire from the igniter.
4
Remove the burner assembly from the unit.
Burner Cap
Burner Assembly
Igniter
Electrode Wire
Remove the Orifice
Use a
9
/
32
” socket with extension to remove the orifice from
the orifice holder.
Simmer
Orifice
Main
Orifice
ORIFICE INSTALLATION
WARNING
When installing the orifice to the orifice holder, only
pipe thread compound should be used. Do not use
Teflon tape to seal gas connections.
Install the Orifice
Use a
9
/
32
” socket with extension to install the orifice into
the orifice holder.
Install the Burner Assembly
1
Attach the electrode wire to the igniter.
2
Place the burner assembly into the burner pan.
3
Use a T-15 Torx bit to install the screws holding the burner
assembly to the orifice holder, torqued to 24 in lb.
Install the Burner Cap
Place the burner cap onto the burner assembly.
Install the Burner Grate
Place the burner grate onto the cooktop.
CG Professional Gas Cooktop Service Manual
service.subzero.com
828386 REV. A 06/2018
8
