Wolf Garten Robo Scooter 1800, Оригинальная инструкция по эксплуатации

Страница: 78 / 362

Chapter 4 - Robomow Operation
19
Preparing the Unit
If you do have Sub-Zone(s):
3.3.9 Going to Sub-Zone 1
The unit will follow the Perimeter Wire around the edge towards
the Sub-Zone.
3.3.10 Press STOP at Zone Entry
P
When the unit is at least 5 m (16 ft.) inside that Sub-Zone –
Press Stop to learn the distance from the Base Station to Sub-
Zone Entry.
If you
don’t have an additional Sub-Zone:
P
Choose the mark and press .
If you do have another Sub-Zone(s):
P
Choose the mark and repeat the Sub-Zone procedure
(
See Section 3.3.8
).
3.4 After Setup is Complete
Once the wire setup is complete, you can drive additional pegs at a
distance of approximately
1 m (3.3 ft.) between them.
P
Use additional pegs in areas where there are bumps or dips in
the lawn.
If needed, purchase extra pegs.
P
Inspect the wire installation for tripping hazards.
From this point on the unit is ready to be charged.
Once fully charged it will automatically mow your lawn.
Scroll to select mark. Press .
Scroll to select the approximate Area of the
Sub-Zone Press .
Scroll to select mark.
Press .
78
en