Wolf Garten Robo Scooter 1800, Оригинальная инструкция по эксплуатации

Страница: 61 / 362

2
If your lawn does not match this description, read the next
Sections to find the style of your lawn.
If your lawn is “Main Zone Only”, you can skip to
Section 1.4 of this chapter to determine Base Station
location.
1.2.2 Main Zone + Sub-Zone(s) Type Lawn
This type of lawn consists of more than one zone and these
zones are connected by a pass. The pass may be relatively
narrow, but it is wide enough for the unit to drive through.
In this type of lawns, the unit will be able to drive itself from one
zone to the other in order to mow the whole area.
If you answer “yes” to all of the following questions, your lawn is a “Main
Zone + Sub-Zone(s)” type lawn:
U
Is your grass area one continuous area?
U
Are parts of your lawn separated from the Main Zone?
U
Is there a Narrow Pass that is wide enough for the unit to drive
through between these zones: 1.2 – 5 meters (4 – 16 ft.)?
U
Is this Narrow Pass firm, level and smooth (not stony, sandy or
elevated)?
For example: grass area, sidewalk, firm path, solid ground.
Such additional areas are called Sub-Zones.
You will instruct the unit to drive through the Narrow Pass in order to get to
a Sub-Zone. It will mow both the Main Zone and its Sub-Zone(s) one zone
at a time.
If your lawn does not match this description, skip to the next
Section 1.3 of this chapter: “Separate Zones”
.
In order to make sure the unit drive into the Sub-Zone and back, we have
to further examine the lawn area:
P
What is the width of the Narrow Pass?
If the pass is 1.2 – 2 m (4 to 6.5 ft.)
wide… If the pass is 2 – 5 m
(6.5 to 16 ft.) wide…
P
During Perimeter Wire setting:
You will use a simple Template
supplied with your unit. This will
guide the Perimeter Wire through
the pass area.
(See Section 2.2.2 page 9).
P
During One-Time Setup:
You will set the unit to work in a
Sub-Zone mode.
P
During Perimeter Wire
setting:
You will set the Perimeter
Wire as in a regular Main
Zone type lawn. The unit
can navigate through the
pass without special wire
settings.
P
During One-Time Setup:
You will set the unit to work
in a Sub-Zone mode.
Main + Sub-Zone with a Narrow Pass
Main Zone
Main Zone
Sub-Zone
Narrow Pass
Main Zone
Main Zone
Main Zone
Main Zone
2 – 5 m (6.5 to 16 ft.)
1.2 – 2 m (4 to 6.5 ft.)
61
en