Wohler AMP1-S8DA, Руководство пользователя

Страница: 63 / 76

82 10 30 : A MP x-S 8 S e r ie s U se r G u id e
© 20 13 Wo hl e r Te c hn ol og i e s , In c . A l l r ig h ts re se rv ed .
51
C ha p t e r 5 Setup Menu
Pr e s e t M o d e
Preset Mode
For more information about presets Refer to Chapter 5 : Setup Menu on
page 43 .
To enable or disable
Preset
mode:
1. Press
Fn+Setup
.
2. Use the
Up
and
Down
arrow buttons until PSet Mode PSet Mode PSet Mode PSet Mode appears in
the LCD window and press
Enter
.
3. Press the
Up
and
Down
arrow buttons to toggle between Disa Disa Disa Disa
(disabled) and Ena Ena Ena Ena (enabled). Press
Enter
to accept the new
setting, or press
Escape
to cancel the change. Either way, you will
be returned to the
Setup
menu.
4. Press
Escape
again to return to normal operation.
Erasing a Preset
This menu command allows you to erase a stored preset. Pressing the
Enter
button will allow the user to choose a preset to erase.
Figure 5–10 Erasing a Preset - Choose the Preset
Number
The
Left
and
Right
buttons select from among the available presets.
Once you press the Enter button to select a preset, the system will
warn you that the preset will be erased.
Note: This selection will not appear if all the presets are
empty. In this case, you will need to store at least one
preset to enable this menu item.
Note: If the unit does not have any stored presets, this menu item
will not appear.
Choose PresetNum
Preset1: Off Air
USO
RESTRITO