Wohler AMP1-S8DA, Руководство пользователя

Страница: 37 / 76

82 10 30 : A MP x-S 8 S e r ie s U se r G u id e
© 20 13 Wo hl e r Te c hn ol og i e s , In c . A l l r ig h ts re se rv ed .
25
C h a p t e r 3 Audio Configuration
M o n i t o r i n g a n d M i x i n g M o d e s
4. Press either the
Up
or
Down
arrow followed by the
Enter
button
to change the setting, or press the
Escape
button to leave it as is.
5. Press the
Escape
button again to return to normal operation.
Monitoring and Mixing Modes
Arbtrary Mixing
1. Press any of the eight speaker assign buttons to activate the mixing
(summing) feature. This mode is indicated by the LCD screen
showing
MIX MIX MIX MIX in the upper right and left of the display. See Figure
3–4 below for an example.
Figure 3–4 LCD screen: Speaker Assign
2. Each subsequent press of a speaker assign button assigns the
selected channel to the left, both, right or neither speaker channel.
All eight channels may be mixed/summed in this way. With each
successive button press, the color of the associated speaker assign
LED, and the mixing/routing of that channel, cycles through the
following sequence
Table 3–1 Speaker Assign Selection
Button Press Results
1st Green (routed to left speaker only)
2nd
Alternating Green and Amber
(routed to both left and right speakers)
3rd Amber (routed to right speaker only)
4th Off (not mixed or routed into either speaker)
MIX AES1 MIX
1 3
2 4 - -
USO
RESTRITO