Wohler AMP1-S8DA, Руководство пользователя

Страница: 47 / 76

82 10 30 : A MP x-S 8 S e r ie s U se r G u id e
© 20 13 Wo hl e r Te c hn ol og i e s , In c . A l l r ig h ts re se rv ed .
35
C h a p t e r 3 Audio Configuration
T e r m i na t i n g / U n t e rm i n a t i ng I n p u t s
Terminating/Unterminating Inputs
Each of the AES and bitstream inputs on the AMPx-S8 may be
terminated or unterminated independently of each other. A given
input should be terminated when the AMPx-S8 is the last receiving
device in the signal path or is the only receiving device in the signal
path. If the signal loops through the AMPx-S8 to another receiving
device, the input should be unterminated in the AMPx-S8 (and
terminated at the last device in the signal path). Terminating the signals
properly improves signal integrity, and ensures the signal will be
received correctly by all the devices in the signal chain.
In the AMPx-S8 monitors, the terminations are set to "Enabled" by
default for the balanced AES inputs and unbalanced AES inputs inputs.
To change the termination settings:
1. Hold the
Fn
button while pressing the
Setup
button.
2. Press the
Down
button once. The LCD should look similar to the
image in Figure 3–14 below.
Figure 3–14 AES Termination Settings
3. Press the
Enter
key. The LCD should now look like the image
Figure 3–15 or in Figure 3–16 .
Figure 3–15 Termination Setting Currently Enabled
Figure 3–16 Termination Setting Currently Disabled
848131 4.00
Setup: Aes Term
AES Termination
Unbal. 1: Ena
AES Termination
Unbal. 1: Disa
USO
RESTRITO