Wohler AMP1-S8DA, Руководство пользователя

Страница: 38 / 76

8 21 03 0 : A MP x-S 8 S e r ie s U se r G u id e
© 2 01 3 Woh le r Te ch no lo g ie s, Inc . A ll ri g ht s re s e r v ed .
26
C h a p t e r 3 A u d i o C o n fi g u r a t i o n
M o n i t or i ng a n d M i x i n g M o d e s
Single
This mode allows you to select one and only one signal for each speaker
independently of the other speaker and is most useful when you are
monitoring mono sources.
To select channels individually for each speaker:
1. Press the
Fn + Single
buttons to enable single channel selection.
Figure 3–5 Single Channel Selection
2. Press the
Left Up
or
Left Down
buttons to cycle through the
channel selections for the left speaker. Likewise, press the
Right
Up
or
Right Down
buttons to cycle through the channel
selections for the right speaker.
Pairs
This mode allows you to quickly assign one pair of channels to the
speakers. The selections are limited to Channels 1-2, 3-4, 5-6, and 7-8.
In all cases, the odd channel is sent to the left speaker, and the even
channel to the right. This mode is most useful when you are
monitoring stereo sources.
To select channel pairs for each speaker:
1. Press the
Fn + Pair
buttons to enable channel pair selection.
Figure 3–6 Channel Pair Selection
2. Use the
Left Up
,
Left Down
,
Right Up
or
Right Down
buttons
to cycle through the channel pair selections.
CH1 AES1 CH2
----
CH7 AES1 CH8
----
USO
RESTRITO