Wohler AMP1-S8DA, Руководство пользователя

Страница: 28 / 76

8 21 03 0 : A MP x-S 8 S e r ie s U se r G u id e
© 2 01 3 Woh le r Te ch no lo g ie s, Inc . A ll ri g ht s re s e r v ed .
16
C h a p t e r 2 Sy st em O v e r v i e w
Re a r Pa n e l C o n ne c t o r s
determine which audio pairs are de-embedded on these 75
Ω
,
unbalanced, AES outputs. No other monitoring function affects
these outputs.
The pinout of this connector is the same as that for a standard VGA
cable. VGA cables may be used to break out the HD-15 connectors
into separate BNCs.
Figure 2–8 AES Unbalanced Out from SDI
HD-15 Pin-Out
• (Optional) Balanced AES Output from SDI Input (DB-25): This
connector outputs de-embedded audio. The last SDI input and
group selection determine which audio pairs are de-embedded on
these 110
Ω
, unbalanced, AES outputs. No other monitoring
function affects these outputs.
The pin-out for this connector is compatible with Tascam DB-25 to
XLR cable assemblies. Contact your Wohler sales representative for
availability. (Wohler’s contact information is on page ii of this
document.).
Note: The DA model does not feature SDI capability.
Table 2–4 VGA Connector Pin-Out
SDI Channels Cable Color/Function
1 and 2 Red
3 and 4 Green
5 and 6 Blue
7 and 8 Grey/H-Sync.
Not Used Black/V-Sync.
Note: You must specify either the balanced (DB-25) or the default
unbalanced (HD-15) output connector at the time you place
your order.
USO
RESTRITO