Wohler AMP1-S8DA, Руководство пользователя

Страница: 52 / 76

8 21 03 0 : A MP x-S 8 S e r ie s U se r G u id e
© 2 01 3 Woh le r Te ch no lo g ie s, Inc . A ll ri g ht s re s e r v ed .
40
C h a p t e r 4 Pr e s e t s
M e t h o d s of A c ce s s i n g t h e P re s e t s
Saving a Preset
1. Press
Fn+Preset 1
.
If Preset 1 is currently empty, the system will prompt you to save
and name the current unit configuration to Preset 1.
2. Name the preset by using the
Up
and
Down
arrow buttons to
scroll through the available list of characters. Press
Enter
to accept
each character.
3. When you’re done entering all the characters, scroll until _DONE_ _DONE_ _DONE_ _DONE_
appears in the window, and press
Enter
.
Recalling a Preset
If, after pressing Fn+Preset 1 , the preset is not empty, the system will
prompt you to recall Preset 1, and Preset 1's name will appear in the
LCD. If you press
Enter
, the system will recall the preset.
Overwriting a Preset
If the preset is not empty (after pressing Fn+Preset 1 ) the system will
prompt you to recall Preset 1, and its name will appear in the LCD.
1. If you press Escape while the preset recall prompt is showing, the
system will ask you if you want to overwrite the preset. If you
want to overwrite the preset with the unit's current settings, press
Enter
.
2. Press
Enter
to continue.
3. Save Old Name? Save Old Name? Save Old Name? Save Old Name? will appear, with the selected preset number
and current name below it. If you wish to use the name displayed,
press
Enter
, and skip the rest of the following instructions. Your
current settings are now stored in the selected preset.
Otherwise, if you wish to enter a new name, continue on with
Step 4 below.
4. Press
Escape
.
Note: _DONE_ is located between the lowercase letters and
before the numbers.
USO
RESTRITO