Page 67
As shown in the above example, signals appearing on Audio Meter channels 1
through 8 are routed to AES Pair 1 and signals from Audio Meter channels 9 to 16
are routed to the Analog XLR outputs.
How do I have a downmixed pre-fade output on AES Pair-1
combined with a post-fade output on the Analog XLRs?
To downmix a pre-fade output on AES Pair-1, uncheck the
Volume Control
checkbox for that AES pair. For a Post-fade output on the Analog XLRs, check
Volume Control
checkbox.
How do I make the XLR outputs follow the Audio Meter screen
solos & mutes while the AES Pair-1 does not?
Make the settings shown in the
Solo / Mute
column:
The setting shown above determines that outputs will follow the Audio Meter screen
solos & mutes for the XLR outputs because the checkbox is checked. It is not
checked for the AES outputs, so they will not be affected by the solo & mute
choices. This feature requires the optional OPT-OUTPUT-ROUTING output routing
