_________________________________________________________________________________________
www.wnt.com
XND.00016.012_A – 04/2018
26
The reference axis is always taken to be the Ø12 F7 positioning holes on the "0" axis.
The longitudinal slots for the M12 clamping screws are arranged in such a way that the T-slot
tables can be fitted in slot spacings of 50 / 63 / 100 / 125 mm.
As an additional alignment aid, alignment surfaces
-x-
are available on both sides and on the
rear of the plate.
4.1.2
On machine table with Ø12 / M12 grid holes, 50 mm grid
Positioning and fixing with two locating
screws
-f-
, Ø12 F7 / M12 through the
two positioning holes on the reference
axis of the front plate.
(see 9.2 Accessories)
Insert additional screws, using normal
M12 cylinder screws
-g-
, DIN 912,
through the five slotted fixing holes
Max. torque: 70 Nm
Reference axis
-x-
-f-
-g-
-g-
-x-
