_________________________________________________________________________________________
www.wnt.com
XND.00016.012_A – 04/2018
23
3
Description of the clamping device
The MNG rectangular quick-change palleting system has been designed for stationary installation
on machine tables and clamping blocks of vertical or horizontal machining centres.
The base plates are fitted as a combined unit with two holes for the locating bolts.
The following components can be clamped using the quick-change palleting system:
clamping devices such as machine vices, single or double pallets and unmachined parts.
When adapting the locating bolts and indexing cylinder pins directly into a part to be
processed, it should be taken into account that the flatness of the base plate bearing surface
is max. 0.1 mm.
It is also possible to fit individual components instead of
the locating bolts, which can then be processed.
Items needed for single palletising:
1 off MNG rectangular quick-change palleting system
Each component:
1 off MNG locating bolt
2 off indexing cylinder pins Ø12 M6
fitted in the component to be clamped.
The cylinder pins must not protrude more than max.
7 mm in order to be able to benefit from the 90°
indexing of the base plate.
Standard application using two locating bolts
I
tems needed for double palletising:
1 off MNG rectangular quick-change palleting system
2 off MNG locating bolts
fitted with a spacing of 200 mm in the components to be
clamped.
