120-063
P2010 © Firma WJG, Braunschweig. Nachdruck oder Vervielfältigung nur mit ausdrücklicher Genehmigung
RDS-Function:
RDS is a digital information system which signals are transmitted on FM-frequency. It allows broadcasting
stations to transfer additional information.
AF (Alternative Frequencies):
Is the AF-mode active the radio constantly check the signal strength of the current station and the alternative
stations. You can activate this mode by tapping on the button RDS [11].
By pressing the button longer you can activate the regional code additionally which means the device only
consider stations with the same PI-code. REG appears on the display.
TA (Traffic Announcements) [12]:
If the TA-mode is active an incoming traffic announcement will break into broadcasting features or the
playback of other media. Furthermore a hint appears on the display.
PTY (Program Type) [12]:
Is the PTY-mode active the station search works according to the individual adjustment.
The Addressing of Files on Storage Media:
Address the different ports with MOD [10].
When MP3-files on SD- or USB- data storage medium should be played the following functions are active.
With the buttons [15] and [16] skip to the previous or next file.
With AMS [3] switch track number- (TRK SCH)
!
file- (FILE SCH)
!
character search (CHAR SCH).
By turning VOL/SEL [14] make the input of TRK SCH, FILE SCH and CHAR SCH.
Attention: SD- or USB-data storage media should be formatted by a computer to be recognized without
problems by the radio’s software! Probably MP3-files with a bitrate under 128 kbps will not be recognized by the
radio!
Bluetooth-Function of the Radio:
By pairing a Bluetooth-able cell phone and a headset with the radio you can control incoming and outgoing calls
and you can adjust the volume too.
The device can handle up to two cell phones.
Pairing the Cell Phone with the Radio:
Press VOL/SEL [14] until the display shows PAIRING.
Activate the Bluetooth-function of your cell phone.
Activate the Bluetooth-search mode of your cell phone.
The display of your cell phone should show CAR HANDSFREE now.
Accept the pairing and enter the PIN-code 0000.
If the pairing was successful on the radio’s display shows DC-. If it is not appearing during the next 2
minutes repeat the process.
If the radio is switched on the next time press [13] for a few seconds until the display shows DC-.
Now the connection to the cell phone is made again.
