120-063
P2010 © Firma WJG, Braunschweig. Nachdruck oder Vervielfältigung nur mit ausdrücklicher Genehmigung
The Function Selector / Volume Control (VOL/SEL) [14]:
1. By simple turning the rotary switch control the volume of the radio.
2. By multiple pushing the switch get the following switching mechanism: Volume
!
bass
!
treble
!
balance
!
fader
!
volume. All functions can be adjusted by turning the rotary switch and will be displayed on the
screen.
3. Press the button for more than 2 s to enter another adjustment menu. All these items here can be adjusted
as described above. Skip to the next item by pressing the switch [14] for more than 2 s.
3.1 TA SEEK/TA ALARM (Traffic Announcements)
By turning the button [14] you can toggle between the two functions. In the mode TA SEEK the device
searches for another station automatically when the current one does not send TA-information or is getting
weak. In the mode it will not search automatically but gives an alarm signal.
3.2 MASK DPI/MASK ALL (Masking)
By turning the button [14] you can toggle between the two functions. In the mode MASK DPI all stations
without a PI-Code will be ignored during a search. In the mode MASK ALL all stations without a PI-Code and
a weak RDS-signal will be ignored.
3.3 RETUNE-L/S (Skip Interval for TA SEEK)
By turning the button [14] you can toggle between the two functions. With RETUNE-L the next station will
be addressed after 180 seconds. With RETUNE-S after 45 seconds.
3.4 AUDIO-DSP (Equalizer)
By turning the button [14] you can toggle between the four functions. There are the following possibilities
POP M, ROCK M und CLASS-FLAT M.
3.5 LOUD ON/OFF (Loudness)
By turning the button [14] you can toggle between the two functions. With LOUD ON bass and treble will be
emphasized at a low volume level.
3.6 MULT ON/OFF
By turning the button [14] you can toggle between the two functions. (Not available for this model)
3.7 SCROLL 1 / SCROLL 2
The displayed messages on the screen move either from left to right (SCROLL 1) or from right to left
(SCROLL 2).
3.8 BEEP ON/OFF (Key Sounds)
By turning the button [14] you can toggle between the two functions. With BEEP ON you will hear a sound
every time push a button. (Not available for this model)
3.9 STEREO/MONO
Toggle between the two functions by turning the switch [14].
3.10 DX/LOCAL (Receive mode)
Toggle between both functions by turning the switch [14]. In DX mode the station search includes long
distance scanning. In LOCAL mode only regional station will be considered.
