120-063
P2010 © Firma WJG, Braunschweig. Nachdruck oder Vervielfältigung nur mit ausdrücklicher Genehmigung
To handle calling:
When a call is incoming the radio will give a sound and shows the number of the caller on the display.
To answer the call presses [13].
During the call you can adjust the volume with VOL/SEL [14].
To end a call presses [6].
To use the redial function of your cell phone press [13] for two seconds.
By pressing SCAN [7] lay the calling either to the headphones or the speaker system of the vehicle.
A2DP (Advanced Audio Distribution Profile):
This function allows sending stereo audio signals wireless via Bluetooth from the cell phone to the car radio. For
activating this function press MODE [10] until the display shows BT-PLAY. Now any MP3-file play backed on the
cell phone will be transferred to the radio and could be listened to through the car’s speaker system.
Installation:
1. Use the screw (5) for attaching the angle
bracket (7) to the radio console (3) in the
dashboard.
2. Release the screws and remove the
mounting frame (2) from the radio (1).
3.
Insert the mounting frame (2) in the
radio console (3) and use the screw (8)
and washers (4&6) for attaching it to the
angle bracket (7).
4. Bend the metal claws of the mounting
frame (2) as much as necessary.
5.
Connect all cable to the radio (1) and
push it into the mounting frame (2)
subsequently.
Connection terminals POWER (A) and SPEAKER (B) :
