Witt 24310037, Инструкции по установке и использованию

Страница: 19 / 52

19 19
After connecting the cooker to the gas supply, make sure that you
• check that the connections are correctly sealed using a soapy solution, but never a
naked flame.
• check whether the injectors are correct for the type of gas being used. If not, follow
the instructions under “GAS MAINTENANCE”.
• replace the sealing washer/s on the slightest sign of deformation or imperfection.
The sealing washer/s is/are the part/s which guarantee/s a good seal in the gas
connection.
• use two spanners when connecting the rigid or flexible pipe (fig. 2.2).
Gas connection with rigid or flexible pipe
Manifold
male
pipe fitting
Right or left
inlet pipe
1/2” G cylindrical
(EN ISO 228-1) male
1/2” G cylindrical
(EN ISO 228-1) female
1/2” G cylindrical
(EN ISO 228-1) female
1/2” G conical
(EN 10226-1) female
1/2” G cylindrical
(EN ISO 228-1) female
Sealing
washer (#)
Conical
adaptor (#)
Flexible pipe
(not supplied)
Rigid pipe
(not supplied)
Fig. 2.2
(#)
If not already fitted
on the inlet pipe,
it is supplied with
the appliance in a
separate kit
Interpose
the gasket
supplied