WL
-
430T 4G Wireless Modem with all function
UserManual
7
1.3 System Requirements
The following system requirements are the recommended minimum specifications
to successfully install and run:
Software Requirement:
Operating system:
Microsoft Windows XP Professional with Service Pack 1 or 2
Microsoft Windows 7 Professional (32-or 64-bit)
Microsoft Windows 2000 Professional with Service Pack 1, 2, or 3
Microsoft Windows Server 2003
Internet Explore
Internet Explorer 6.0
Internet Explorer 8.0
Google Chrome
Mozilla Firefox
Hardware Requirement:
Ethernet hub with standard RJ45 Ethernet cable or Ethernet port with RJ45 crossover cable
for direct connection to module
A Computer with RJ45 Ethernet port
128 Mbytes of RAM minimum, 256 Mbytes of RAM recommended
100 Mbytes of free hard disk space (or more based on application requirements)
256-color VGA graphics adapter, 800 x 600 minimum resolution (True Color 1024 x 768
recommended)
1.4 Power Requirements
The WL-430T-A accepts voltages between 9 and 30 VDC, with an average power draw of
9 watts or less. A detachable power connector comes with the radio, as shown below.
The connector terminals are l (positive DC connection) GND (ground
connection) - (negative DC connection).
The AC-to-DC power supply adapter may be used. DC power wires must be less than
2 meters in length to meet regulatory requirements.
Important:
When wiring the power connector, be sure to observe the
proper polarity markings on the power connector. Improper connector
wiring can cause serious damage to the WL-430T-A which will not be
covered under the Witlinc Technology Warranty.
