WL
-
430T 4G Wireless Modem with all function
UserManual
15
Important:
you must assign the same Network SSID and WPA phrase to
the
other devices which communication to the master module
3.
All the parameter configured completely, Click
Save & Apply,
the module
will reboot
4.
After the module reboot, the WiFi parameter will be effective.
2.6
Setup the WiVPN Function
1.
While in client site, WiVPN actively makes connection to the server side, if passed
the server authentication, a VPN connection would be established.
Below are steps to make connection to a WiVPN server:
1.
Before config WiVPN client, you need to get 3 files from WiVPN server
administrator: ca.crt, clientX.crt and clientX.key
2.
And ask WiVPN server administrator for parameters about server address,
server port and cipher.
3.
Through web management interface:
Services
->
WiVPN
, you can see sample
instances as show below.
4.
Click “EDIT” button corresponded to “sample_client”. And type in WiVPN
server address (IP or FQDN) and server port (there must have space between
server address and server port). As show below.
5.
Click “
Switch to advanced configuration
>>” as show below.
