WL
-
430T 4G Wireless Modem with all function
UserManual
12
Setup the
Protocol
⚫
If the WAN IP address is assigned by the DHCP from Network-A, then set
it as DHCP Client
，
the WAN port can get the IP address from Network-A
DHCP Server Automatically.
⚫
If the WAN IP address is assigned by your provider through the PPPOE,
then select the PPPOE label. And enter the Username and Password.
You can get the Username and Password from the Network-A Provider.
Then the WAN Port will receive a static IP address or a dynamic IP
address automatically.
⚫
After the Protocol configuration complete, Click the Save & Apply, the
module will reboot.
⚫
After the module reboot, the Network-A and Network-B will be
connected, and communication to each other.
2.5
Setup the WiFi Function
1.
WiFi Function has been integrated into the module, with this function customer
can access the module by the mobile devices which has WLAN function. The
function is based on 802.11n, Configure the WiFi Function you can scroll your mouse
to the
Network
then choose
WiFi
, you can see the webpage as below:
