11/16
ProphyCair & Pro
Version: 01
ENGLISH
9
Product Description - Mattress
Self-contained mattress replacement system/ mattress overlay system (
A
) with easily detachable components for cle-
aning. Flame retardant, water repellant, mildew resistant, low friction and low shear, 5” or 8” high (inflated) detachable
lateral tubular air cushions (
B
) (16~22). Detachable zippered or strapped highly breathable, reusable, quilted Top Sheet
composed of two layers; Top layer is made out of urethane coated 70 Denier nylon or Dartex material. Bottom layer is
made out of quilted material. It is flame retardant, water repellant, vapor permeable, anti-microbial, low friction and low
shear (
C
). 2” safety air pad or convoluted foam pad enclosed in a foam/air pad base (
D
) to support the patient in the
event of loss of air pressure in the mattress. The mattress has a hose assembly (
E
) with easy to use quick connect and
disconnect connector coupling (
F
).
Mattress Weight Capacity
NOTE: See bed frame manufacturer’s manual for bed frame weight rating.
ProphyCair systems are used for patients who weigh between 15 kg and 455 kg.
WARNING
It is highly recommended that the ProphyCair system always be installed on medical bed frames that are equipped with
standard hospital side rails or assist rails. Please raise all side rails on the bed and lock them in position after the patient
is on the mattress. Health care professionals assigned to each case should make the final determination whether side or
assist rails are warranted after assessing patient risks of entrapment and falls in accordance with State patient restraint
legislation or facility interpretation of such legislation.
Check that all air hoses and power cord are clear of moving bed components before placing a patient on the bed and
that the mattress system is fully inflated. Operate all bed frame motorized functions through their full range of motion to
be certain that there is no pulling, interference or pinching.
Mattress MUST fit bed frame and side rails snugly to prevent patient entrapment.
10 Unpacking the System
NOTE
When opening the large system box or the small control unit box, ensure that the object used to open the box does not
penetrate and damage the components inside.
Components Supplied
Complete Replacement Mattress System Box
1 Control Unit box & 1 Mattress
D
E
C
B
A
F
BF
G
H
FB I
