rtsp
Go to "Remote Setting"
;
"Network"
;
"RTSP" to enter the interface.
•
rtspenable
: Enable or disable RTSP. RTSP is enabled by default. After it
is disabled, it will not be found with ONVIF.
•
rtsp port
: The default port number is 554, and can be changed to
another value between 1024 and 65535. Modification to the parameter will
restart the system.
•
operation instructions
: For IP cameras of 5MP Series: rtsp://IP:RtspPort/
ch00/A A:0 (main bit stream), 1(sub-bit stream)
ip filter
Go to "Remote Setting"
;
"Network"
;
"IP Filter" to enter the interface.
You can create a list of IPs that you want to grant or deny access to them.
1.
Select filtering mode.
•
allow all ip connections
: If selecting this, access all IPs.
•
allow only ip connections which have been setup
: If selecting this,
access from only those IPs that are added to the filtering will be accepted.
•
do not allow the ip connections which have been setup
: If selecting
this, access from those IPs that are added to the filtering will be restricted.
2.
Click the <
add
> button.
The IP list will be created.
3.
Select an IP to delete from the list.
Click the <
del
> button.
Camera Menu
24_
Camera Menu
