remote setting
On the network, you can set up display, record, alarm, network and system.
1.
On the live screen, click the <
remote setting
> button.
2.
The Setup screen appears.
display
In this section, you are allowed to configure the camera, live view display, adjust IP camera’s image, Motion setup, privacy zone,
and more.
live
Go to "Remote Setting"
;
"Display"
;
"Live" to enter into the interface.
•
name
: Can be up to 32 characters in length.
•
refresh rate
: Refresh Rate of the camera.
•
show name
: Showing camera name.
•
show time
: Enable or disable displaying system time.
image Control
Go to "Remote Setting"
;
"Image Control" to enter into the interface.
•
ir-Cut mode
: Select the desired built-in IR cut filter mode to ensure the
camera works properly both in the day and night.
•
ir-Cut delay
: Set the delay time of IR-CUT switching.
•
lens flip/angle flip
: Check to enable lens flip and angle flip.
•
back light
: To enable or disable Backlight compensation.
•
3d noise reduction
: To enable or disable 3D noise reduction function.
•
wdr
: Enable to allow automatically adjust the brightness and contrast of
the video when shooting in the darkness with bright light sources.
•
agC
: Automatic Gain Control.
•
white balance
: Configure white balance.
•
shutter
: Set the shutter mode.
•
defog level
: Use in foggy environments to improve the video quality.
18_
Camera Menu
Camera Menu
