installing the Camera (Zno-8020rv)
The camera can be installed on the wall, ceiling, shelf or a desired position using the provided mounting bracket.
1.
Choose an installation site that can sufficiently support the weight of the camera to be installed.
2.
Drill holes.
3.
Connect the camera cable to the camera.
Take caution when installing the camera outdoors because the cable connectors may be wet with moisture or pile up with
impurities.
Although the camera is IP66 rated, direct exposure to water or moisture may cause problem such as condensation.
4.
Attach the camera mount to the wall using the supplied screws.
5.
Adjust the direction of the camera to the desired direction, and tighten the bracket.
6.
Adjust camera angle as needed.
how to connect the rJ45 waterproof cable to a lan cable
1.
Insert it through the arrow direction.
2.
Connect the LAN connector (male) to the cable.
10_
installation & connection
installation & connection
