Wisenet SPE-1630, Руководство пользователя

Страница: 37 / 43

English _ 37
●
SETUP SCREEN
Alarm input
You can set the alarm input type, activation time, and operation mode.
1. From the Setup menu, select the < Event ( ) > tab.
2. Click < Alarm input >.
3. Set whether or not to < Enable >.
4. Select the type.
• N.O. (Normal Open) : It is normally open, but if it is closed,
an alarm will be triggered.
• N.C. (Normal Close) : It is normally closed, but if it is open,
an alarm will be triggered.
5. Specify the < Event activation time >.
• Always : Always check if an alarm occurs. It activates in operated mode when the alarm occurs.
`
If set to < Always >, the activation time cannot be changed.
• Only scheduled time : Check if an alarm occurs at a specified day of the week for a specified time
period. It activates in operated mode when the alarm occurs.
- [ ] : Sets the time display format on the vertical axis.
- [Reset] : Reset all settings.
6. Specify an operation that will perform if an alarm occurs.
• FTP : Specify the use of FTP transfer in the alarm input setup.
`
Refer to “ FTP / E-mail ” for more details. (page 36)
• E-mail : Specify the use of email transfer in the alarm input setup.
`
Refer to “ FTP / E-mail ” for more details. (page 36)
• Alarm output : Select whether to set the alarm output if an alarm is incoming, and specify the alarm
output time.
• Goto preset : Moves to the specified preset location when setting the alarm input.
`
Preset Move is possible only when the encoder and PTZ camera are connected.
`
Only the preset of the same channel as the alarm input number can be set.
(e.g., Alarm 2
;
Channel 2
;
Preset of Channel 2)
7. When done, click [ Apply ].
Time schedule
You can configure settings to transmit images at regular intervals at a scheduled operation time regardless of
the occurrence of an event.
1. From the Setup menu, select the < Event ( ) > tab.
2. Click < Time schedule >.
3. Set whether or not to < Enable >.
4. Specify the < Transfer interval >.
5. Specify the < Event activation time >.
• Always : Always activates in operated mode at the set
interval.
• Only scheduled time : Periodically activates in operated mode at a specified time and date.
J
`
The transfer interval setting value must be smaller than the preset activation interval to succeed in image transmission.
6. Specify the activation conditions.
• FTP : Specify the use of the FTP transfer if an event occurs.
`
Refer to “ FTP / E-mail ” for more details. (page 36)
7. When done, click [ Apply ].
Video loss
You can set the camera so that the camera can trigger an alarm to notify the user If the video has been lost
due to disconnection with the camera.
1. From the Setup menu, select the < Event ( ) > tab.
2. Click < Video loss >.
3. Select the channel to set.
4. Set whether or not to < Enable >.
5. Configure the event motion schedule and event motion
conditions.
`
For more information about < Event activation time > and < Event
action settings >, refer to “ Alarm input ”. (page 37)
6. When done, click [ Apply ].