Wisenet SPE-1630, Руководство пользователя

Страница: 24 / 43

web viewer
24_ web viewer
To Use Audio
1. Click [ Audio ( ) ] icon to activate audio communication.
2. Use [ Audio control ] bar to control the volume.
M
` If there is no sound from pulling in and out the audio jack while it is in operation, click the
[ Audio ( ) ] icon to enable it again.
` To use audio, you need to set < Audio in > in “ Video Profile ” to < Enable > (page 25).
To Use Microphone
Click [ Mic ( ) ] icon to activate the microphone.
To count the number of pixels
1. Click the [ Pixel count ( ) ] icon to activate it.
2. Drag the mouse on the video to select an area.
3. The number of pixels in the selected area is displayed on the screen.
To control PTZ
1. Click the [ PTZ ( ) ] icon.
2. Move the jog dial [ ] on the Move Screen pad to move the camera direction, or zoom in or out by
moving the bar on the right side of the UI up or down.
3. Select [ ] of the screen focus to adjust the focus.
To apply the preset
• Preset : Applies the saved preset.
Refer to “ External PTZ ” for detailed preset settings. (page 29)
- Move : Applies the saved preset.
- Setup : Specifies the preset.
To check the profile status
You can check the profile information.
1. Click the [ Status ( ) ] icon.
2. The profile access information screen is updated whenever the screen is enabled.
• Profile access : Show the information of the newly added profile.
- Profile : Show the information of the newly added codec.
- Bitrate(kbps) : Show both the actual bit rate and the set bit rate.
- Framerate(fps) : Show both the actual frame rate and the set frame rate.
- Concurrent users count : Show the number of concurrent users who access the profile.
• Current users : Shows information on users accessing web viewer and displaying monitoring video.
- Profile : Show the name of the profile accessed by the user.
- Bitrate(kbps) : Show the current bit rate.
- Network connection status : It shows whether the network is working fine.
- IP address : Show the IP address of the current user.