Wisenet SPE-1630, Руководство пользователя

Страница: 19 / 43

English _ 19
●
NETWORK CONNECTION AND SETUP
PORT RANGE FORWARD (PORT MAPPING) SETUP
If you have installed a Broadband Router with a product connected, you must set the port range forwarding on
the Broadband Router so that a remote PC can access the product in it.
Manual Port Range Forwarding
1.
From the Setup menu of the Broadband Router, select
<
Applications & Gaming
> - <
Port Range Forward
>.
For setting the port range forward for a third-party Broadband
Router, refer to the user guide of that Broadband Router.
2.
Select <
TCP
> and <
UDP Port
> for each connected product
to the Broadband Router.
The number of each port to be configured to the IP router
should be set according to the port number designated
in <
Setup
> - <
Basic
> - <
IP & Port
> on the product web
viewer.
3.
When done, click [
Save Settings
].
Your settings will be saved.
M
`
Port forwarding setting is an example of setting CISCO IP router.
`
The settings may differ depending on the connected Broadband Router model.
For more information, refer to the user manual of the applicable router.
Setting up Port Range Forward for several network products
• You can set a rule of Port Forwarding on the Broadband Router device through its configuration web page.
• A user can change each port using the product setting screen.
When Product#1 and Product#2 are connected to a router :
User Internet
Broadband Router
Start End Protocol IP Address
3000 3000 TCP/UDP 192.168.1.100
3001 3001 TCP/UDP 192.168.1.101
8080 8080 TCP/UDP 192.168.1.100
8081 8081 TCP/UDP 192.168.1.101
Product #1 (192.168.1.100)
HTTP port 8080
RTSP port 3000
Product #2 (192.168.1.101)
HTTP port 8081
RTSP port 3001