Wisenet QRN-1630S, Быстрое руководство

Страница: 11 / 14

11
Connecting to a Network Using a Router
If you want to add 1-3 PCs and recorders in an environment using xDSL/Cable modem, you can use the router with
only one Internet line.
This guide is an installation guide for network beginners. Follow the instructions to set up your router, local PC, and
recorder.
Connecting the cable
Internet
Cable/ADSL/VDSL
or
IP Router
Local PC
Recorder
Connecting a router with PC
■
Refer to the router's user manual.
Connecting a recorder and a router
Move to < IP & Port > of the Recorder < Network > Setting menu, and set the < IP address > and
<
Gateway
> in <
Setup
>.
※
The < Default gateway > checked on the [ cmd.exe ] window of the local PC and the < Gateway > of the
recorder must be the same.
※
At least the third number of the recorder < IP address > should be set to be the same as the < Default
gateway > checked on the [ cmd.exe ] window of the local PC.
<cmd screen>
<ex. Recorder screen>
To connect to the Wisenet Viewer from your PC
1
Go to https://www.hanwha-security.com on your PC.
Install and run the "
Wisenet Viewer
" app.
2
Select
<IP type
> to <
DDNS/P2P
> in the "
Settings
>
Device
>
Device list
>
Add
>
Manual
" menu.
3 Enter the recorder ID/password and <
Product ID
>, and then click <
Register
>.
The information of the current recorder will be displayed, and you can use the "
Wisenet Viewer
" app.
■
P2P service period expires in 5 years. If you want to extend it after expiration, contact your vendor.
To connect to the WebViewer from your PC
If you connect to
http://ddns.hanwha-security.com/product ID
including <
Product ID
> in the local PC
address bar, the recorder's web viewer screen will appear.