Wisenet QRN-1630S, Быстрое руководство

Страница: 3 / 14

3
QRN-830S
Recorder Mouse Power Cable
Power Adaptor Quick Guide HDD Fixing Screw (4 ea)
SATA Power Cable
Installing the HDD
■
If you are adding a new or previously used HDD to this product in addition to the HDD(s) originally installed, format the new HDD manually in the
set before use. To learn how to format, see "
Device/Format " in the User Manual.
■
If you wish to replace or add an HDD, contact your dealer or our customer service first.
QRN-1630S/XRN-815S
■
The following figures are based on Model XRN-815S.
1 Remove the screws from the left/right sides and
back side, and push the cover back to release it.
2 Connect the SATA/power cable of the hard disk to
the connector of the main board.
■
Refer to the figure below for the hard disk location number and
connector number.
2
1
2
1
■
Gently press the connector before removing the HDD. Do
not force to pull the cable.
3 Use the screws to fix the hard disk to the bottom
of the recorder.
4
Make sure that there is no problem in the
connection port and routing inside the recorder,
and then fix it using screws after closing the cover.
■
When closing the cover, be careful not to damage the cable.