WISAP Cervix Coagulator, Руководство пользователя

Страница: 32 / 44

GA_Portio-Koagulator_E_150914.docx
Page 32 of 44
7 T
ROUBLE SHOOTING
Fault Description Possible Causes Remedy

No device function

No display is activated

Mains switch 1 does not
light up

Failure at mains supply

Defective mains fuses

Have supply network
checked

Exchange fuses
(observe type of fuse,
see „Technical Data)

Have device serviced
by manufacturer or by
authorized dealer

Mains switch 1
illuminates, no device
function

Internal device failure

Have device serviced
by manufacturer or
authorized dealer

Device does not heat up

control lamp, RED: 3
illuminates

Heating is electronically
interrupted

therapy probe 3 is
defective or not plugged
in.

Temperature is too
high.

Internal device failure.

Turn device off, connect
new probe and turn
device on again

Have device serviced
by manufacturer or
authorized dealer
CAUTION!
If the probe comes into contact with tissue, no sizzling sound may be
audible. Such sound would signalize exceeded coagulation temperature
(above 100°C).