Wirepath Surveillance WPS-500-PTZ-IP, Инструкция по установке и эксплуатации

Страница: 8 / 56

WPS-500-PTZ-IP Installation Manual
Pg. 8
© 2013 Wirepath™ Surveillance
3- Required Items for Installation
The following items are required during the installation of a
Wirepath™ IP Camera. It is recommended that these items are prepared
in advance to ensure that the installation can be performed smoothly.

All Cameras to be installed in the system

Network Connection near the location of the Camera

Administrator rights to the computer that will be used to configure the Camera(s)
o
Router / Switch Details
– Contact the network admin to obtain
o
Admin Rights
– Required to setup the network and port forwarding for remote access.
o
Static IP to assign to the Camera
o
Default gateway
o
Subnet Mask
o
DNS Address

Installation Manual for all the
Wirepath™ Surveillance IP Cameras being installed

CD-ROM supplied with the Camera
4- Package Contents
(1) WPS-500-PTZ-IP
(1) 12V DC 3A Power Supply
(4) Screws
(4) Wall Fasteners
(1) Quick Start Guide
(1) CD-ROM containing documents and setup software
NOTE: A POWER SUPPLY IS NOT INCLUDED WITH THIS CAMERA. The PS-12DC-1A, WPS-PS multiple output power supply or
a Power over Ethernet (PoE) switch is recommended.