Wirepath Surveillance WPS-500-PTZ-IP, Инструкция по установке и эксплуатации

Страница: 11 / 56

WPS-500-PTZ-IP Installation Manual
Pg. 11
www.snapav.com Support: 866.838.5052
6- Main Camera Interface
Note: The camera requires configuration before accessing for the first time. See sections 9-IP Installer Software and 10-
Initial Configuration before opening the browser.
6.1- Accessing the Camera
Note: IE 8.0 or higher is required to access the camera; other browsers are not supported at this time.
A. Open the web browser, and enter the IP Address that was assigned to the camera. The address should include the
port number assigned to the camera. Note that access varies between local network and remote access through a
DDNS.
Local Network Example:
http://192.168.1.56:8056
Remote Access (DDNS) Example: http://JonesIPCamera.Wirepathdns.com:8056
B. A window will open asking for a username and password.
Default Username and Password:
Username: admin
Password: admin
Recommendation: After initial setup of the Cameras, we recommend that the password be changed to avoid
unwanted access.
C. Install the ActiveX control if prompted to do so.
D. After installing the ActiveX the camera should be visible in the web browser, if the camera does not appear, verify the
IP address by using the IP Installer.