Wirepath Surveillance WPS-500-PTZ-IP, Инструкция по установке и эксплуатации

Страница: 37 / 56

WPS-500-PTZ-IP Installation Manual
Pg. 37
www.snapav.com Support: 866.838.5052
12.7.2- FTP Settings
When an FTP server is configured, recorded video and snapshot files can be stored on the server for later
access. Contact the network administrator for FTP server information.
FTP Server
FTP Site address. This is usually the same as one would use to access the
FTP site from a browser or FTP client.
Username
Username used to log into the FTP Site.
Password
Password used for the Username account on the FTP.
Port
Port to use for FTP connection. This is usually 21.
Path
Directory on the FTP site to store content.
Note: We recommend using path names containing only letters, numbers and
underscores to ensure reliable communications.
Example: /ALARM/, /ALARM123/ or /ALARM_123/.
Mode
Data channel method to use when logging into the FTP. This is an advanced
setting and should not be changed from PORT unless instructed to by the
network administrator.
Create the Folder
When set to YES, a folder will be created on the server with the date in
YYYYMMDD format. Files are saved as the time in HHMMSS format.
12.7.3- Network Share Settings
When a network share is configured, recorded video and snapshot files can be stored on NAS drives or
computers with Samba support for later access. Contact the network administrator for network storage
information.
Location
Network path of the Samba/network share server and share name.
Note: The server must be identified by its IP address and followed by the
network share name.
Example: \\192.168.250\
JonesFolder”.
Workgroup
Network Workgroup name for the Server. If not known this may be left blank.
Username
Username used to log into the server.
Password
Password used for the Username account on the server.
Create the Folder
When set to YES, a folder will be created on the server with the date in
YYYYMMDD format. Files are saved as the time in HHMMSS format.