Wirepath Surveillance WPS-100-NVR-4IP Скачать руководство пользователя

Страница: 25 / 70

WPS-100-NVR-4IP Installation Manual

Pg. 25

www.snapav.com Support: 866.838.5052

12- Browser Configuration Menu

The local and browser configuration menus contain the same settings for the NVR. Changes to settings are synced in real time and are
available in both menus as they are made.

12.1- System Information

This menu displays important information about the NVR

’s network settings, and allows for setting items such as language, Date, and

Time.

12.1.1- Server Information

Displays information about the NVR

’s MAC Address, allows for entering a name to easily identify the NVR,

and selecting a language for the GUI.

Server Name

Name for the NVR (limited to 31 characters) that will appear in the IP Installer, and
GUIs.

Language

Select the language to use for the Main NVR Interface.

MAC
Address

Displays the MAC Address of the NVR. This cannot be adjusted, and will appear
grayed out.

12.1.2- Time Settings

Proper time settings are important for producing accurate time stamps for events, recorded video, and
captured snapshots.

Server Time

Displays the Current Time and Date for the NVR

Date Format

Select the desired format to display the Date.

Time Zone

Time Zone can only be adjusted when NTP, or Manual are selected.

Enable Daylight
Savings

Enabled by default. Daylight Saving Time Start and Stop parameters can be
configured.

NTP

Enabled by default. Keeps NVR time synchronized with a Network Time Server.

Recommendation: We recommend that the default (pool.ntp.org) be used
as it pulls from multiple redundant servers.

Synchronize With
PCs Time

Sets the NVR date and time to that of the local PC, and then shifts to the NVR

’s

internal clock. After applying, Time Setting is indicated as Internal Clock.

Manual

Allows for manual entry of the date and time, then shifts to the NVR

’s internal

clock.

Internal Clock

Shifts the NVR to using the Internal Clock only. Automatically selected after
using Synchronize with PC’s time or Manual time settings.

Содержание WPS-100-NVR-4IP







































































Результаты поиска

Содержание WPS-100-NVR-4IP

Отзывы:

Похожие инструкции для WPS-100-NVR-4IP

Бренды по названию

Популярные бренды

Wirepath Surveillance WPS-100-NVR-4IP, Инструкция по установке и эксплуатации

Результаты поиска

Содержание WPS-100-NVR-4IP

Отзывы:

Похожие инструкции для WPS-100-NVR-4IP

Бренды по названию

Популярные бренды