Wirepath Surveillance WPS-100-NVR-4IP, Инструкция по установке и эксплуатации

Страница: 7 / 70

WPS-100-NVR-4IP Installation Manual
Pg. 7
www.snapav.com Support: 866.838.5052
2- Manual Overview
We recommend that this document is read in its entirety before proceeding with system design, installation, or operation of the WPS-
100-NVR-4IP. When viewing this document electronically, the content identified within references can be quickly located by clicking
on the reference. These references have been formatted as a standard hyperlink so that they can be easily identified with exception
to the TOC which can also be used to link to sections.
3- Required Items for Installation
The following items are required during the installation of a Wirepath™ IP NVR. It is recommended that these items are prepared in
advance to ensure that the installation can be performed smoothly.

All NVR to be installed in the system

All Cameras to be installed in the system

All Encoders to be installed in the system (Optional)

Network Connection near the location of the NVR

Administrator rights to the computer that will be used to access the NVR(s)

Router / Switch Details
– Contact the network admin to obtain
o
Admin Rights
– Required to setup the network and port forwarding for remote access.
o
Default gateway
o
Net Mask Address
o
DNS Address
o
Static IP to assign to the NVR

Installation Manual for all the Wirepath™ Surveillance IP NVR being installed

Quick Start
Guide and Installation Manual for Wirepath™ Surveillance IP Cameras

Quick Start Guide and Installation Manual for Wirepath™ Surveillance Encoders

CD-Rom supplied with the NVR
4- Package Contents
(1) WPS-100-NVR-4IP
(1) USB Mouse
(1) IR Remote
(1) 12V DC 4.16A Power Supply
(2) AAA Batteries
(2) HDD Screws
(1) HDD Bracket
(1) Quick Start Guide
(1) CD-Rom containing documents and setup software