28
CONFORMITY – TECHNICAL DATA – ACCESSORIES
29
ACCESSORIES – GUARANTEE CONDITIONS
The electrical swivel belt winder /
roller shutter drive eWickler Standard
fulfi ls the requirements of the valid
European and national guidelines and
directives.
Low tension directive
•
2006/95/EC
EMC directive
•
2014/30/EU
RED directive
•
2014/53/EU
The conformity has been proved. The
corresponding declarations and docu-
mentation are available on fi le at the
manufacturer’s premises:
WIR elektronik GmbH & Co. KG
Hölderlinstrasse 57 – 59
48703 Stadtlohn
Germany
Technical Data
Supply voltage:
230 V ~ 50 Hz
Maximum rated power:
120 W
Standby consumption
(eW910, 910-F / 930-F):
≤ 0,2 W / ≤ 0,5 W
Rated torque:
11 Nm
Rated speed:
32 rpm, regulated
Maximum traction power:
45 kg
Belt width:
23 mm or 15 mm (eW9x0-M)
Winding capacity:
6,3 m
Permissible surface area of roller
shutters:
Approx. 6 m2 in case of 5 kg/m2
Approx. 3 m2 in case of 10 kg/m2
Short-term operation:
4 min
Overrun:
< 0,2 r
Protection class:
II
Protection type:
IP20
Power reserves
(in case of a power blackout):
about 20 h
Distance between the
fi xing holes:
213 mm
Measurements Casing:
(HxDxW)
193 x 158.5 x 37 mm
Valid for the eW930-F
Transmission frequency:
868,3 MHz
Transmission power:
max. 10 mW
Range inside a building (depen-
ding on the building structure):
15 – 20 m
Range under free fi eld conditions:
max. 200 m
Maximum number of registerable
remote controls:
50
Wireless sunlight/ twilight
sensor:
1
Accessories
To adapt the swivel belt winder Standard to the local
conditions, a broad selection of accessories is avai-
lable to you.
You can fi nd information about these on the follo-
wing homepage:
www.wir-elektronik.de/en
Zubehör Funk SD-Sensor eSO400
Accessories: light sensor
eSO371
1 m cable length
eSO371-2
2 m cable length
eSO371-5
5 m cable length
Accessories: wireless sunlight/twilight
sensor eSO400
Warranty conditions
WIR elektronik GmbH & Co. KG off ers a 36-month
warranty for new devices that have been installed
in accordance with the installation manual. The
warranty covers all design faults, material faults
and fabrication faults.
Any defects occurring within the warranty period will
be rectifi ed by WIR elektronik at no cost either by re-
pairing or replacing the parts concerned or by delive-
ry of a device of equal value or a new replacement.
Generally the original warranty period will not be
extended because of replacement delivery or repair
resulting from the warranty.
The warranty does not cover:
•
Incorrect mounting or installation
•
Non-observance of the installation and ope-
ration manual
•
Improper operation or utilisation
•
External infl uences such as knocks, blows or
weather conditions
•
Repairs and modifi cations made by unauthori-
zed third parties
•
Use of unsuitable accessory parts
•
Damage due to inadmissible voltage surges
(e.g. caused by lightning)
•
Malfunctions due to an overlap of radio fre-
quencies and other radio disturbances
This electrical or electronic de-
vice must not be disposed of as
domestic refuse at the end of its
life. To return it properly, please
inform yourself and fi nd out a-
bout collection points for elec-
tronic waste which are close-by
and free of charge, or collecting points for reuse of
these devices. You can receive their addresses from
your town council or local government. For further
information please search on the internet.
Содержание eWickler Comfort eW910
Страница 17: ...32 NOTES NOTES 33 ...
