WIR elektronik eWickler Comfort eW910, Инструкция по эксплуатации

Страница: 5 / 18

8
SHORT DESCRIPTION MEASURES – FUNCTIONS
9
Description:
The swivel belt winder is a classic belt winder
which is to be installed as a surface-mounted
device in interior rooms. You can establish the
power connection via the enclosed cable.
eW9x0-F:
has the additional function at its dis-
posal to analyse acoustic signals of typical smo-
ke detectors and to raise the shutters in case of
an alarm automatically.
eW930-F:
can be operated individually on site or
by a WIR wireless network.
When you integrate the eW930-F into a WIR wi-
reless network, you can use the many functions
of the corresponding WIR wireless controllers.
Start and Stop:
To protect the mechanics the eWickler is equip-
ped with a gentle soft start- and soft stop-func-
tion.
Collision protection / overload disconnection:
If the roller shutter, while lowering, runs into an
obstacle, the eWickler will be switched off . Af-
terwards, further operation into the same direc-
tion is not possible.
First you have to move the roller shutter into the
opposite direction and remove the obstacle.
Then, operation into the original direction is
possible once again.
If the roller shutter is overloaded during the
raising process, the swivel belt winder also
switches off . After eliminating the cause and
movement into the opposite direction, operation
in both directions is available once again.
Functions
•
Adjustable switching/operating times to raise
and lower the shutters
•
Internal, accurate mains-synchronous clock
•
LEDs indicate the active functions. The LED’s
brightness will be lowered when the roller
shutter is closed.
•
Individual sunlight and twilight operation con-
trol is possible with a sensor.
•
Data analysis of smoke detectors available; in
case of an alarm the eWickler-F lifts the roller
shutter immediately (only eW910-F/ eW930-F)
•
Remotely controllable (only eW930-F)
•
Gentle soft start- and soft stop-function of the
motor
•
Electronic weight and run time surveillance to
protect the engine; protection in case of distur-
bances at the roller shutter, e.g. icing in winter
•
Collision protection / disconnection in case of
overload
WIR elektronik is not to be held responsible for changes of guidelines and standards after the publication of this manual! Subject to technical alterations!
233 213 193