V1
11
Winton WAM
4. OPERATING ADVICE
The control levers for the hydraulic RAMs on the arms should return to the neutral position when the
lever Is free. This system is important in order to avoid an involuntary movements or displacements of
the arms.
Using the levers and making absolutely sure that the area is clear of people and obstacles. Power the
arm to its working position. Angle the head so that It can be lowered close to the ground. Keep the
rotor clear of the material to be cut.
Start the rotor by engaging the lever L and increase the tractor PTO speed to 540 RPM.
Lower the head into position and move forward at a suitable speed for the type and quantity of
material to be cut.
WARNING Even with the guards fitted some material may be ejected from the mower. All persons and
animals need to be kept out of the working area.
Cutting Hedges, Reeds & Shrubs
When the material to be cut exceeds 70-80 cm (28"- 32”) in height, it will take more than one pass to
complete the job, cutting 20-30 cm (8" - 12”) maximum on each pass.
