V1
22
Winton WAM
9. SERVICING & MAINTENANCE
Safety: Store all lubricants away from excessive heat, dust, moisture and contaminants.
Safety: Ensure tractor and machine is stopped & keys out of ignition before set-up/maintenance.
Important Information
Greasing & Lubrication Points
1.
Bearings on the blade rotor x2
2.
Bearings on the roller x2
3.
Hydraulic RAMs on the arm x6
4.
All arm pivot points
5.
PTO shaft x2
Wipe grease nipples with a clean cloth before greasing to avoid injecting any dirt and grit. Press grease
into each grease nipple three to five times. We recommend using a hand-held grease gun for best
results.
If grease nipples will not take grease, remove and clean thoroughly. Also clean lubricant passageway.
If you notice any grease points are broken replace or repair them immediately.
Grease Type
Multi-purpose lithium based grease
Grease Frequency
Check every 4-8 hours (top up if required)
1
2
3
