V1
9
Winton WAM
2. INSTALLATION & SET UP (continued)
Safety: Ensure tractor and machine is stopped & keys out of ignition before set-up/maintenance.
Safety: Before attaching/detaching machinery ensure the hydraulic lift system is in a neutral position.
Safety: Make sure the PTO drive isn’t connected at any point until instructed to do so.
Pre-Cutting Checklist
Before starting the machine, always check and adjust the following:
•
Read and understand all parts of this guide.
•
Check blades are in good condition.
•
Check hydraulic oil level.
•
Lubricate all grease points.
•
Check tightness of all bolts, nuts and screws.
•
Ensure all protective guards are in place and in good condition.
•
Make sure correct PPE is used e.g. helmet with visor, ear protection, steel toe shoes etc.
•
Check the area is clear of bystanders or obstructions.
•
Place barriers and signs before working.
•
Adjust rotation of blades to suit direction of cutting.
•
Adjust roller for cutting height.
•
Keep hydraulic fixings tightened to prevent leaks.
•
Ensure hydraulic pipes are not pinched, chafing or being stretched.
•
Ensure the tractor is fitted with adequate guards/protection (e.g. a cabin) to protect the
against thrown debris or parts.
