WinterGreen Wood Furnaces IM-130, Руководство пользователя

Страница: 60 / 66

POWER FAILURES – SYSTEM BACKUP
Continued:
Backup Generator:
The installation of a Home Standby Generator System is the most beneficial resolve if you frequently
encounter prolonged power outages. The generator can supply sufficient power to operate all compo-
nents of the heating system and home needs automatically if an outage should occur. Installation of the
Home Standby Generator System should be performed by a licensed electrician.
A
Portable Generator can be used to power your WinterGreen Furnace during a power outage provid-
ing it is of sufficient size to handle the load. We suggest a minimum of 3000 watts capacity. It is very
important that if you are using a portable generator as a backup, it must be connected to the furnace as
soon as possible after a power outage occurs. The circulation pump must be operating as quickly as
possible to avoid overheating and damage to the furnace components.
Never operate a Gas operated generator in confined or closed areas.
Place outdoors and use a 14 gauge extension cord of no more than 50 ft.
in length to connect to the furnace.
System Back Up - Heat from Main Furnace or Boiler:
Whenever there is insufficient heat from the WinterGreen furnace due to a lack of fuel (i.e., no one is
available to reload the furnace), the main furnace can be fired as a backup protection. The installation of
an additional thermostat to control the heat from The WinterGreen Furnace allows the normal house
thermostat to be set several degrees below the WinterGreen Furnace. Should the WinterGreen Furnace
not produce the required heat to maintain the desired house temperature, the home furnace will “Kick in”
and supply the necessary heat to meet the demand.
Consult a Plumbing and Heating Contractor. An experienced H.V.A.C. or plumbing contractor can
advise you as to alternatives and solutions that would suit your installation.
Note: This backup system should be installed by a qualified H.V.A.C. professional.