WinterGreen Wood Furnaces IM-130, Руководство пользователя

Страница: 14 / 66

FURNACE – UNLOADING & MOVING
Continued:
Note:
The furnace should be placed on a non-combustible floor made of concrete or masonry. Consid-
eration should be made when deciding a location for the furnace, it should be close to a chimney, a
power source and have easy accessibility to your wood supply. If your WinterGreen furnace is to be lo-
cated in a garage, National Codes require that the lowest point of ignition be at least 46cm/18” from the
floor. If the furnace is to be installed in a separate enclosed space where combustion air is taken from
outside the garage, this rule does not apply.
(See Page 17 – Mounting on a Cement or Masonry Base)
Although Your WinterGreen furnace is certified for minimal clearance from combustible surfaces, it is
advisable to verify local authorities for all clearances
before the installation begins.
READ THE SECTION “FURNACE INSTALLATION –LOCATION” in the Owner’s Manual.
The installation location must have provisions to shelter the furnace from weather and protect it
from freezing intake air.
DO NOT INSTALL THIS FURNACE IN A MOBILE HOME OR TRAILER.
INSTALL A CARBON MONOXIDE DETECTOR AND SMOKE ALARM IF
THE NSTALLATION IS IN A HOME, GARAGE OR AN ENCLOSED AREA.