WinterGreen Wood Furnaces IM-130, Руководство пользователя

Страница: 3 / 66

TABLE OF CONTENTS
Section Page
Draft Inducer and Barometric Damper
Draft Inducer location and installation 36
Draft Inducer-installation on stove pipe 37
Draft Inducer-Electrical outlet on furnace 38
Barometric Damper location and Installation 39
Maintenance 40
Draft Setup
What is draft 41
What is the Draft Inducer and Barometric Damper 41
Manometer and where to test 42
Barometric Damper setup 42
Draft Inducer setup 43
Measuring and adjusting the flue draft 44
Maximum draft setting 45
Negative Air – Make-up Air
Negative air problems 46
Supplying Make-up air 46
Determining the volume of fresh air 46
Confined and unconfined space 47
Plumbing Installation
System configurations 48
Filling the system 48
Closed System – basic plumbing configuration to furnace 49
Open System – basic plumbing configuration to furnace 50
Closed System – basic plumbing configuration to boiler 51
Side Arm Heat Exchanger (Hot water tank) 52
Furnace Plenum Heat Exchanger 53
Plumbing components and functions 54
Wiring and Controls
Basic wiring and controls 55
Wiring schematic 56
Furnace control panel 57
Power Failures – System Backup
Overheat protection during a power failure 58
Power outage instructions 58
Battery Backup power supply (Schematic) 59
Installing a back-up generator 60
System backup – Heat from main furnace or boiler 60
Thermal Spike Protection
Why have thermal spike protection 61
Thermal spike protection methods 61
Maintenance – Furnace
End of season and general maintenance 62
Flushing the system 62
Firebox refractory cracks 62
Maintenance – Chimney
Chimney inspection and cleaning 63
Creosote 63
Chimney Fire 64
Troubleshooting Guide 65
Warranty 66